BH Mortar Industrial Co., Ltd.
China manufacturer of dry mortar mixing and packing equipment
Add to Cart
Automatic dry mortar machine cement blending mortar dry mortar plant
Descriptions of dry mortar plant :
BH series high quality automatic dry mixed mortar production line is based on the latest design concept in Europe, this production adopts the advanced computer auto-control system, whose production capacity can reach 30-100 thousand tons per year depend on the system configuration.
Main configuration of dry mortar plant :
1, Raw material storage silo
2, Bucket elevator
3, Spiral conveyor
4, Weighing system
5, Mixer
6, Finished product bin
7, Packing system
8, Dedusting system
9, Computer control system
10, Air compressor
11, Steel structure
Parameter:
| Mixer | Mixer volume | Capacity | Total power | Occupation area | Height | Worker required |
| BHR1000 | 3680*1200*2200(mm) | 1-5t/h | 18-35kw | 20m² | 3.5m | ≥4 |
| BHE2000 | 2m3 | 5-8t/h | 47kw | 30m² | 6m | ≥4 |
| BHSW2000 | 2m3 | 10-15t/h | 60-80kw | 50-60m² | 9m | ≥4 |
| BHSW3000 | 3m3 | 15-25t/h | 80-110kw | 60-80m² | 9.5m | ≥4 |
| BHSW4000 | 4m3 | 25-35t/h | 100-150kw | 80-100m² | 10m | ≥4 |
Working principle of BH dry mortar plant :
According to requirements of the customers, the system can be equipped with 3-6 bulk storage bins. Cement and flyash will be filled to the silos by pump truck, then the cement, sand, flyash and additives will be conveyed to the metering and batching system for dosing, the material in which will, after being processed by the metering and batching system, be conveyed to pending-for-mixing bin, and then fed into the high-efficiency biaxial agravic-mixer for continuous mixing. The finished product in conformity with mixing accuracy requirements can be sent to the finished products bin shortly after mixed.
Features:
1. The mixing speed, mixing cycle of dry Mortar Production Line/Dry Mortar Plant/Dry Mortar Mixing Plant is short, 30-120 sec / batch;
2. Dry Mortar Production Line/Dry Mortar Plant/Dry Mortar Mixing Plant has obvious price advantage, small investment.
3. Dry Mortar Production Line/Dry Mortar Plant/Dry Mortar Mixing Plant has mixed-speed, mixed-short(60-120s), unloaded at the end of open-nesting, the low rate of residual material.
4. According to the needs of users, configure the compressed air injection system to minimize the level of residues.
5. Dry Mortar Production Line/Dry Mortar Plant/Dry Mortar Mixing Plant are several liquid adding systems so as to meet the customers' requirements on barious liquids adding.
Advantage for Common Mortar Plant :
1. Operate Simple ;
2. Consistent quality ,controlled inventory ,saving time and labor cost .
3.By adding different chemical additives ,it has fine properties of bond ,thermal and acoustic insulation,crack-resistance ,workability , Water-retention,wear-proof,anti-corrosion;
4. Improve building’s quality and life greatly;
5. Bring Profit largely ;Demand large .
We can design the most reasonable dry mortar production line with factory price according to your Budget investment, Capacity, Area condition, Formula, Different end products,etc. These dry mortar plants can add configurate with crushing machine, screen machine and drying machine, in the area of lack of dried sand.
Installation site:
