BH Mortar Industrial Co., Ltd.
China manufacturer of dry mortar mixing and packing equipment
Add to Cart
Cement mixed machine slab laying mortar mix station dry mix plant
Description:
The structure of the large ready-mixed mortar mixing station is similar to that of the concrete mixing station. The silo is exposed, the side is arranged, and the oblique spiral is fed. Efficiency and investment are between tower and step. It is suitable for the production of many kinds of ordinary dry mortar and special products. The equipment covers a medium area and the investment is medium. 3-5 operators, the output can reach 10-80 tons per hour, is a good choice for companies with a certain scale and sales.
Functions of Dry Mortar Production Line:
| Item | Equipment | Functions |
| 1 | Material in-charge hopper | for charging material to bucket elevator. |
| 2 | Bucket elevator | Lifting materials to pre-mix silo. |
| 3 | Double shaft non-gravity mixer | uniform mixing of materials, special paddle sets suitable for fiber mixing. Big double door could accelerate material discharge uniformly, paddle sets are optional according different type material. |
| 4 | Finished product silo | for storing finished material and secondary mixing of pre-packing material. Finished product silo is available for connecting automatic metering packer and manual discharging valve |
| 5 | Automatic metering packer | packing finished product by automatic weighing, high accuracy. |
| 6 | Pulse dust catcher: | absorb the dust during production process, mainly used for de-dust from material in-charge hopper and packer. |
| 7 | Control cabinet | includes instrumentation and PLC control for controlling electrical switch of the whole production lines. |
| 8 | Compressor | Produce compressed air for the whole air compressing system |
Features of BH dry mortar plant:
1. The mixing speed is fast, only 2-3 minutes for each mixing;
2. The machine is developed on the basis of the technical essence of multi-generation new models. It has automatic feeding, pneumatic discharging, no block on the barrel wall and no dead angle.
3. Small land area, reasonable structure, simple operation, high production efficiency, no dust, and reasonable power preparation.
4. Reasonable configuration; production of about 80 tons of dry powder mortar production line, under normal circumstances will use 4-6 raw material tanks, two large tanks for loading bulk cement and fly ash, the remaining small tanks for loading Put light calcium, heavy calcium, sand, small materials, etc.
5. Bulk cement and fly ash into the tank does not require lifting equipment, relying on pump trucks to enter. The clever material distribution system supports a bucket elevator assignment, thus avoiding wasted resources.
6. The metering system introduces the raw materials in the silo into the measuring bin under the cooperation of the measuring spiral, and realizes the raw material metering through the data feedback of the sensor. The metered material is guided into the main bucket lifter through the screw conveyor and lifted to the upper part of the mixer to be mixed.
7. The mixed warehouse is a pneumatic large opening type, which can quickly put the materials to be mixed into the gravity-free mixing machine to realize continuous production of dry mortar.
Application:
Can be used to produce plastering mortar, masonry mortar, bonding mortar, special mortar, interior and exterior wall putty powder, interface agent, tile adhesive, cement self-leveling mortar, concrete additive, stone adhesive, plaster plaster, caulking gypsum, polymer Insulation mortar, emery wear-resistant floor mortar, sun-heating paint and other powder materials.
Details:
Installation site: